3K
Several people are reporting me issues with the latest 2.26.16 firmware update for the ST-LINK interface of their Nucleo. After flashing the ST-LINK 2.1 interface with this firmware release, the debugging interface no longer works. The symptoms are that it's no longer possible to use the interface, nor flash it again. The STLinkUpgrade 3.0.7 shows this error:
Reading this post from an ST engineer, and thanks to the fact that I have saved an old ST-LINK firmware release (2.24.11), I successfully restored the ST-LINK interface.
Proceed in this way:
- Download this old ST-LINK firmware from here.
- Connect your development board to the USB interface.
- Do a quick shortcut between SB11 and RST pads (they are located on the bottom side of the board), as shown below:
- Start the STLinkUpgrade 3.0.3 (the one downloaded before) and downgrade the firmware.
- Disconnect your Nucleo board from USB and reconnect it again.
10 comments
Lifesaver. Thank you.
thank you.......
Hello,
I use Nucleo-F767ZI evalution board. I try to connect the board and laptop with USB cable, but I got 'No ST-Link Device detected problem' during ST-Link Firmware device connection process. RST AND SB111 pads have already connected with a resistor on the board. So, do you have any solution for this problem?
Thank you
Thank you, done !
Thank you so much, on the most recent firmware I wasn't able to use my Nucleos ST-LINK to upload stuff, only through Mass Storage. Now ST-LINK works again.
Thanks a lot!
Hey guys, my name is Kyran!
I
m an academic writer and Im going to change your lifes onсe and for allWriting has been my passion since early years and now I can
t imagine my life without it.m working with services that help people to save their time.Most of my poems were sold throughout Canada, USA, Old England and even India. Also I
People ask me "Sir, Kyran Mckinney, I need your professional help" and I always accept the request, `cause I know, that only I can solve all their problems!
Academic Writer - Kyran Mckinney - http://www.aa-mediastudies.net Band
THANK yer.
You saved my board and money! Thanks a lot!
Wow, you saved my board!