A blog about electronics and programming

Home › Forums › Mastering STM32 book support forum › Empty Hex File


Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • January 31, 2019 at 12:48 pm #11395
    Amir
    Participant

    Hi Folks

    I have installed the custom IDE, following the steps of the book as closely as I could. The blinky project however generates an empty Hex file.

    Also, from time to time, I get the following error

    ‘Invoking: GNU ARM Cross Create Flash Image’
    arm-none-eabi-objcopy -O ihex “blinky2.elf” “blinky2.hex”
    arm-none-eabi-objcopy: blinky2.hex 64-bit address 0x4b4fa308000000 out of range for Intel Hex file
    arm-none-eabi-objcopy:blinky2.hex: bad value
    make: *** [makefile:70: blinky2.hex] Error 1

    Any help is much appreciated

    Running Windows 10, new to the business, very exhausted!

    An

    February 1, 2019 at 11:45 pm #11398
    Ron Fracchia
    Participant

    Hi,

    Download latest toolchain:

    https://gnu-mcu-eclipse.github.io/blog/2019/01/19/arm-none-eabi-gcc-v8-2-1-1-2-released/

    “Version v8.2.1-1.2 20190119 is a maintenance release of GNU MCU Eclipse ARM Embedded GCC that fixes the 32-bit objcopy bug present in the previous release.”

    -Ron

  • Author
    Posts

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.